61 found, showing page 1 of 2
$9.89
ZMAX 2X RIGID CORNER TIE
Secures 2 wood members forming a 90 deg (degree) corner to a vertical post. This product is ideal for the construction of workbenches and storage shelving units. 18-gauge galvanized steel. Some sizes available with ZMAX coating. No RTC2Z: Install with 6-sd8 x 1-1/4" on post and 6-SD8 x 1-1/4" on joist or 6-SC9 x 1-1/2" on post and 6-SD9 x 1-1/2" on joist. No. RTC22Z: Install with 5-SD8 x 1.25" screws on post and 6-SD8 x 1.25" screws on joist. No. RTC24: Install with 9-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist. No. RTC42: Heavy-duty. Install with 14-SD8 x 1.25" screws on post and 11-SD8 x 1.25" screws on joist or 14-16d nails in post and 8-10d x 1-1/2" nails in joist.
View Details
$10.79
RETROFIT ZMAX POST BASE
Retrofit post base designed to reinforce existing posts and columns. Can also be used to reinforce new post base connections such as carports, patio covers, trellises, and other structures. When installed with CPS (composite plastic standoff) it meets a 1" post standoff code requirement. Can be installed on a post that is flush to a corner. Two post bases can be installed at away from edge conditions to fortify the post base connection to resist both wind and seismic forces. ZMAX finish protects base from exposure conditions in many environments.
View Details
$0.19
1/2" PLYWOOD CLIP******
Panel Sheathing Clips are used to brace unsupported panel edges when sheathing meets edge-to-edge without a rafter for support. Select the same size sheathing clip as the panel thickness. Keeps panels even for a level plain on the structure. Quick installation, no nails needed. Provides a 1/8" gap between plywood panels as recommended by the American Plywood Association. 20-gauge galvanized steel.
View Details
$0.99
1-1/2X3 NAIL STOP
Nail stoppers help prevent nails from piercing water pipes and electrical lines. Installed over utilities that pass through framing members. 16-gauge galvanized steel.
View Details
$1.89
*HURRICANE TIE
Provides resistance to uplift and lateral forces. Designed to help counter the effect of high wind and seismic events on a structure. Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another. Install in pairs to connect 2x rafter to top plate. Some sizes available with ZMAX coating.
View Details
$2.59
3-1/8x7 TIE PLATE
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
$1.39
1-13/16X5 TIE PLATE
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
$2.29
*1-3/8X2-13/16 ANGLE
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating.
View Details
$1.89
12" STRAP/TIE
Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties. Galvanized steel.
View Details
$7.39
6"X6" T-STRAP
Versatile utility strap. General reinforcement angles for T intersections. These connectors are strongest when used in pairs. Galvanized.
View Details
$7.39
6"x6" L-STRAP
Versatile utility strap. General reinforcement angles for L intersections. These connectors are strongest when used in pairs. Galvanized.
View Details
$1.19
2X1-1/2X1-3/8 ANGLE
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
View Details
$4.79
3X3X1-1/2 ANGLE
Used to reinforce right angle connections. Fastens wood to wood. This product is made to help resist lateral forces. Great for home repair projects. 90 deg. angle. Galvanized steel. Some sizes available with ZMAX coating.
View Details
$2.59
*JOIST HANGER 2x10-14
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
$1.59
2X6 JOIST HANGER 20GA
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
$1.39
2X4 JOISTHANGER LU24
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
$1.99
JOIST HANGER 2x8
Value engineered for strength and economy. Speed prongs included for placement of hanger during installation. 20-gauge galvanized steel.
View Details
$6.99
*UNIVERSAL STAIR BRACKET-LEFT
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
View Details
$6.99
*UNIVERSAL STAIR BRACKET-RIGHT
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
View Details
$6.99
*UNIVERSAL STAIR BASE BRACKET
The GoPro system saves time, money, and headaches. It makes it possible for carpenters, builders and DIY of all skill levels to take on the building of stairs on-site. The secret to the system is the patented pre-stamped measurements on each bracket, which allow the builder to screw the brackets correctly into the wood stringer the first time and without constant measuring or marking. The brackets meet all state building codes and accommodate all rises and runs. The brackets are made from 16-gauge G-185 hot-dipped galvanized steel and can be used inside or outside. The brackets can be used with all types of wood, including treated and artificial wood. The GoPro system saves wood, you can use a 2 x 8 or even a 2 x 6 instead of a 2 x 12. There is minimal cutting of wood, or multiple measuring and marking as you screw in the premarked brackets. It is virtually mistake-proof. There is considerably less chance of squeaking than with conventional stairs. The universal stair bracket is more stable than conventional stringers. And, weight tests conducted by a major North American university demonstrated that our system far exceeded the 300 lb. minimum required in the U.S. For installation
View Details
$1.19
*FRAMING ANCHOR 1-7/16"X4-1/2"
This anchor's exclusive bending slot allows instant, accurate field bends for all 2-way and 3-way ties. Balanced, completely reversible design permits the A35 series angle to secure a great variety of connections. Used to reinforce 90 deg. connections. 18-gauge galvanized steel. Also available with ZMAX coating.
View Details
$13.79
4X4 POST CAP Z-MAX
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
$4.29
2X RIGID TIE CONCTR ZMAX
Wraps around the wood members from 2 directions - eliminating the need for angle bracing. Ideal for rectangular frame construction and wood projects with right angles. Connects (2) 2x members at a 90 deg. angle. Galvanized steel. Some sizes are available in ZMAX coating.
View Details
$3.69
STRAP TIE 2-1/16x12-11/16GA20
Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
View Details
$1.49
2x4 FENCE BRACKET Z-MAX
Simpson Strong-Tie fence brackets make the connection between fence rails and posts simple and strong. Eliminates the need for toe-nailing or screwing. Clean, versatile connections make planning and building fences, deck/porch railing, and louvers easier and faster. Holes are sized for 8d x 1-1/2", 8d commons, or No. 6 wood screws into the supporting members. ZMAX coated steel.
View Details
$35.99
4X4 RETRO-FIT E-Z BASE
A great base for installing a 4x4 post on an existing concrete slab. This attractive post base will hold a 4x4 post securely in place. Base installs with Simpson 8-1/4" SDS double-barrier coat or hot-dip galvanized lag screws. 12-gauge black powder-coated finish steel for corrosion resistance.
View Details
$4.19
HEAVY TIE PLATE Z-MAX
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. 16-gauge galvanized ZMAX steel. 3" W. x 7" L.; use 20-10d x 1-1/2" fasteners.
View Details
$1.99
LSTA 9" STRAP TIE
Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties. Galvanized steel.
View Details
$3.79
2X4" MED L ANGLE ZMAX
The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive screws (SDS). Fastener holes are staggered to minimize wood splitting and opposing hole patterns allows for back-to-back installation without fastener interference. 12-gauge ZMAX steel.
View Details
$5.19
2X6" MED L ANGLE ZMAX
The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive screws (SDS). Fastener holes are staggered to minimize wood splitting and opposing hole patterns allows for back-to-back installation without fastener interference. 12-gauge ZMAX steel.
View Details
$12.79
27" STRAP TIE
Straps are designed to transfer tension loads in a wide variety of applications. Splitting may be a problem with installations on lumber smaller than 3-1/2"; either fill every nail hole with 10d x 1-1/2" nails or fill every other hole with16d common nails. Reduce the allowable load based upon the size and quantity of fasteners used. Galvanized steel.
View Details
$1.59
WT6 WEDGE FORM TIE
The Simpson Strong-Tie wedge tie (WT) is a form tie that secures concrete forms in place while the concrete is poured. It easily installs between form boards and accurately spaces the forms. Several models are available for varying wall thickness and types of form boards.
View Details
$1.59
WT8 WEDGE FORM TIE 18GA.
Designed for low foundation wall applications. 5/8" wide formed V design for rigidity allows accurate form spacing and support. Use (2) 3-1/2" long wedges for each tie. Used with 2x solid sawn lumber. Not recommended for wall pours greaterthan 4' high. 18-gauge galvanized steel.
View Details
$1.89
PLATE MENDING 3-1/8x5"
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
$14.79
*4X4 POST BASE
The PB base embeds in wet concrete after pour and is made to install flush with the concrete surface. This connector was designed to help resist upload forces. Holes are provided for installation with 16d commons. A 2" minimum side cover is required to obtain the full load. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or carports). 12-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
$1.39
1-1/2X6 NAIL STOP
Nail stoppers help prevent nails from piercing water pipes and electrical lines. Installed over utilities that pass through framing members. 16-gauge galvanized steel.
View Details
$3.19
STRAP TIE 2-1/16"x9-7/16"GA20
Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
View Details
$8.19
STRAP TIE 1-1/16"x22-7/16"GA16
Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
View Details
$2.19
ANGLE FRAMING 3"
Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
